Loading... Please wait...
Check out E Airtool 1 on Yelp

Pneumatic Pavement Breaker Demolition Hammer Sullair MPB90A 90lb Jack Hammer 114

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
MPB90A 114
In Stock
Calculated at checkout
Current Stock:

 Product Description

Sullair Breaker / Jack Hammer

Designed for Work Efficiency and a Long, Trouble-free Life

High-Wear Parts Reduced


The Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear, less maintenance, and less downtime.

No Tappet System


Unlike conventional breakers, Sullair breakers have no multi-part tappet system. With fewer parts, wear is reduced and risk of air leak is minimized. With no tappet system, which requires three independent impacts, noise is also reduced.

One Piece,
Non-Protrusive Housing


A leakproof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods, nuts, and springs makes Sullair breakers sleeker and more comfortable to operate.

Minimal Lubrication Required


With only two parts moving during operation, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Manual lubrication before storage is sufficient.

Direct Impact Piston


One moving impact part minimizes maintenance.

Parts Interchangeability


Standardization of design permits a high degree of interchangeability of parts between Sullair models.



The piston, impacting directly on the steel shank rather than a tappet, reduces noise level of the breaker.

Smoother Operation


Reduced kickback is less fatiguing to the operator.

Improved Latch Design


Durable double roll pin permits easy steel changing.

Less Air Consumption


The direct impact piston design, non-corrosive distribution valve and one-piece housing dramatically reduce air consumption. You can operate more tools from a single compressor. For example, a 125 cfm compressor will operate two MPB 90 breakers.

Model: MPB90A

This tool has been tested and is working great! If you are looking for a great used pavement breaker, this tool is for you. You are bidding on a well priced 90 lb jack hammer here! It comes with 2 reconditioned bits free but if you would like brand new chisels or need other accessories please contact us!


Weight 92 lbs.
Length 27 1/2"
Bore & Stroke 2 7/16" x 5 9/32"
Impact Rate 1380 blows/min.
Air Consumption 62 cfm
Air Inlet Diameter 3/4" NPT
Shipping Weight 120 lbs.
Chuck Size 1 1/8" HX x 6"
1 1/4" HX x 6"

This tool is 1 1/4" HX x 6"

 Warranty Information

All tools (NEW and REBUILT) have a 30 day warranty through us from the day you receive your tool so please use your tool at least once within 30 days of receiving it. The only tools that do not come with a 30 day warranty are tools that are stated as (USED). Used tools are only guaranteed to be in working condition when you receive them! In the event your tool has a warranty issue your tool will be repaired free of charge. If your tool cannot be repaired your tool will be replaced with one of the same make and model or you will be refunded completely. There is a 20% restocking fee on tools that are decided not correct for the job unless a larger or more expensive tool is purchased so please contact us if you are unsure what you need and we can help you determine what you need for the job.


All customers located in the state of Michigan will be charged 6% Sales Tax

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


Copyright 2019 E Air Tool 1. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Pneumatic Pavement Breaker Demolition Hammer Sullair MPB90A 90lb Jack Hammer 114 to your wish list.