null
  Loading... Please wait...

Heavy Duty Pneumatic Vibrator Global Mfg Inc C3-4.0-4AC

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
Global Mfg Inc
$357.49
SKU:
C3-4.0-4AC
Availability:
In Stock
Shipping:
Calculated at checkout
Current Stock:
1

 Product Description

Heavy Duty Pneumatic Vibrator
Model: C3-4.0-4AC
2 Bolt permanent type mounting
Mount Hole: Center to Center 8"
Air Inlet: 1/4" NPT
Speed: 4050 RPM @ 40 Psi
Speed: 4540 RPM @ 60 Psi
Speed: 5170 RPM @ 80 Psi

Weight: 46 Lbs

 
 
  • Rugged Construction - Ductile iron housings and lightweight hardened aluminum covers.
  • Vibrator Component Alignment - All manufactured equipment contain slight alignment variations due to manufacturing tolerances. Global’s Design Series vibrators have an unique drive coupling design, to compensate for typical alignment variations that exist when two shafts are connected (motor shaft and vibrator shaft). The coupling keeps the vibrational stress off the motor shaft seal. This prevents the motor from leaking because if the motor shaft is allowed to vibrate it would slowly destroy the seal making it ineffective. Some competitive vibrators use the conventional ‘shaft-in-a-shaft’ design; the drive motor shaft slips into the vibrator shaft. This design works only if both shafts remain in perfect alignment regardless of operating conditions. This arrangement often causes motor shaft flexing and fretting within the vibrator shaft, which leads to premature motor failure and a worn out vibrator shaft.
  • Drive Coupling Assembly - The drive coupling allows the motor shaft and vibrator shaft to operate as an "assembly", preventing fretting and stress from misalignment or expansion. Any misalignment or expansion wear takes place in the inexpensive and easily replaced coupling rather than in the motor or vibrator shaft. This superior design protects the motor shaft, vibrator shaft, bearings and seals from the vibration of the unbalanced weights. The result is better performance, no leaks, longer service, and reduced operating costs.
  • Bearings - All bearings are sealed to keep grease in and contaminants out. Our unique oil lubrication system in the D7 and CC7 models helps extend the life of the bearing. The coupling design isolates the unbalanced load from the motor, so the motor bearings see only a balanced load, extending bearing life. Grease lubrication is also available.
  • Air Motor Shaft Seal is isolated from the unbalanced load by the coupling design, extending the life of the seal and preventing air leaks.
  • High Efficiency, Durable, Bi-rotational Pneumatic Motor - Instantly reversible, can be stalled or overloaded without damage, self sealing vanes automatically adjust for their own wear ensuring constant output for thousands of hours.
  • Air Motor Repair Kits available to return motor to like-new condition.
  • Easy Repair and Maintenance - designed for easy change-out of bearings, motors, couplings, and other components to refurbish Design Series vibrators to like new condition. Bearings, o-rings, retaining rings, etc. are standard, commonly available parts.
  • High Amplitude, Moderate Frequency vibration.
  • Versatile - Easy to control force and frequency by adjusting air supply.
  • Available in Permanent Mount and Portable Clamp-on Mount. Clamp-on vibrators use square head set screws with concave cup points for positive self-locking and vibration resistance.
  • Produces Uniform, Directional Flow.

 Warranty Information

All tools (NEW and REBUILT) have a 30 day warranty through us from the day you receive your tool so please use your tool at least once within 30 days of receiving it. The only tools that do not come with a 30 day warranty are tools that are stated as (USED). Used tools are only guaranteed to be in working condition when you receive them! In the event your tool has a warranty issue your tool will be repaired free of charge. If your tool cannot be repaired your tool will be replaced with one of the same make and model or you will be refunded completely. There is a 20% restocking fee on tools that are decided not correct for the job unless a larger or more expensive tool is purchased so please contact us if you are unsure what you need and we can help you determine what you need for the job.

ALL INTERNATIONAL CREDIT CARDS WILL BE CHARGED AN ADDITIONAL 10.00
IF YOU PURCHASE MORE THAN 1 ITEM YOUR CARD WILL ONLY BE CHARGED ONCE.

All customers located in the state of Michigan will be charged 6% Sales Tax

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Copyright 2024 E Air Tool 1. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Heavy Duty Pneumatic Vibrator Global Mfg Inc C3-4.0-4AC to your wish list.